Kayaba MAG-18V-280E-1 Hydraulic Final Drive Motor

Basic static load rating C0:32.5 kN; Calculation factor e:0.3; da max.:28 mm; T:16.25 mm; Calculation factor Y:2; Cb min.:3 mm; ra max.:1.5 mm; Mass bearing:0.17 kg; Limiting speed:14000 r/min; rb max.:1.5 mm;

d:15.000 mm; Oil Speed Rating Open/Shielded n2:20000 rpm; Grease Speed Rating n1:17000 rpm; Fillet Radius ra:1.00 mm; D:42.0000 mm; Basic Static Radial Load Rating Co:5400 N; Grease Speed Rating Open/Shielded n1:17000 rpm; B:13.00 mm; Accessories:One Seal; Sealed Speed Rating n3:12000 rpm;

B:80 mm; r3,4 min.:2.1 mm; Reference speed:630 r/min; Limiting speed:800 r/min; b1:9.4 mm; r1,2 min.:2.1 mm; ra max.:2 mm; das:341 mm; rb max.:2 mm; Mass bearing:23.5 kg;

D:75.0000 mm; Sealed Speed Rating n3:5600 rpm; Basic Static Radial Load Rating Co:16600 N; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; Basic Dynamic Radial Load Rating C:23400 N; Accessories:One Seal; Grease Speed Rating Open/Shielded n1:9000 rpm; B:16.00 mm; d:45.000 mm;

Dynamic (Ca):369 kN; D:215 mm; Static (Coa):473 kN; rs (min):2.1 mm; s:5.4 mm; d2 (max):mm; F:144 mm; d2:120 mm; r1s (min):2.1 mm; b:mm;

Calculation factor Y0:3.2; b:22.3 mm; Calculation factor Y1:3.2; D1 ≈:1212 mm; d2 ≈:1109 mm; Basic dynamic load rating C:11939 kN; K:12 mm; d:1000 mm; ra max.:6 mm; Calculation factor Y2:4.8;

Basic dynamic load rating C:29.2 kN; Fatigue load limit Pu:7.35 kN; Reference speed:13000 r/min; Limiting speed:15000 r/min; Ew:35 mm; U:27 mm; Mass needle roller and cage assembly:0.03 kg; Basic static load rating C0:60 kN; Fw:30 mm;

s:5 mm; r1s (min):2.1 mm; Pu:33.420 kN; Static (Coa):282 kN; E:mm; rs (min):2.1 mm; b1:mm; d2 (max):mm; d2:80 mm; B:44.45 mm;

Oil Speed Rating Open/Shielded n2:2600 rpm; Basic Dynamic Radial Load Rating C:179000 N; Grease Speed Rating Open/Shielded n1:2100 rpm; Fillet Radius ra:2.50 mm; Accessories:One Shield & Snap-Ri; Basic Static Radial Load Rating Co:216000 N; d:130.000 mm; B:40.00 mm; D:230.0000 mm;

End plug (suffix Y):EPR 14; Cap bolt:4 x 3/4-10 UNC; Mass pillow block:93.5 kg; H2:63.5 mm; J max.:463.55 mm; J min.:431.8 mm; S:4.763 mm; Initial grease fill:623.7 g; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:203.4 N·m;

h:46.831 mm; J1:69.85 mm; Cap bolt, SAE grade:8; Ca:67.793 mm; Bearing:22224 EK; P120°:94.3 kN; J min.:336.55 mm; A1:120.65 mm; P90°:149 kN; A2:250.825 mm;

r, r1,2 min.:0.3 mm; B:20 mm; Mass inner ring:0.023 kg; d:22 mm; F:26 mm;

Da min.:638.5 mm; r1 min.:2 mm; da min.:572 mm; Basic static load rating C0:12700 kN; ra max.:2 mm; Basic dynamic load rating C:8500 kN; α:4 °; b:27 mm; Material constant KM:1055; r2 min.:5 mm;

Hydraulic nut:HMV 34 E; Lock nut:KMFE 34; G:M 170x3; Mass adapter sleeve assembly:5.9 kg; d3:220 mm; B:33 mm; B1:101 mm; d:170 mm; d1:150 mm;